"Architectural Type LED Disano, Gear: CLD Cell, Color: Graphite,
Dimension: 0x0x605 Ø400, W Tot: 32, IP65 with Lamp: LED white
32W-4670lm @ 700mA-4000K-CRI 70
Other Features:
Housing and arms: pressed in die-cast aluminium and designed
with a very small surface exposed to wind.
Optics: optics made of PMMA with high temperature resistance
and UV rays.
Pole connection: pressed in die-cast aluminium. Suited for poles
with a diameter 63-60mm.
Diffuser: extra-clear tempered glass, 4 mm thick, resistant to
thermal shocks and impacts (UNI-EN 12150-1: 2001).
Coating: in different stages. Grey epoxy cationic electrocoating,
resistant to corrosive and saline environments. UV stabilized
priming using acrylic resin.
Equipment: nylon wiring plate 30% fibre glass complete with
connector for mains connection and for LED module. Automatic
temperature control inside the device with automatic resetting.
With dedicated electronic
device to protect the LED module. Equipped with an air-circulation
valve.
Energy-saving: the possibility to choose the correct drive current
for LEDs will allow you to have the right power under specific
design conditions, and also help you deal with maintenance and
retrofitting problems. Using a
lower current will improve the efficiency of fixtures and therefore
increase energy savings, whilst a higher current will result in a
higher light flux so that you can reduce the number of fixtures.
Regulations: produced according to applicable EN60598-1 CEI
34-21 standards, degree of protection according to EN 60529
standards.
LED: Power factor 0.9.
Luminous flux maintenance 70% 50000h (L70B50)
4670lm - 4000K - CRI 70
9340lm - 4000K - CRI 70
Upon request:
- with power supply 1-10 V dimmable with subcode 12.
- with virtual midnight subcode 30."
120